5 Best Gun Safe Outlet Kits: Power Inside Your Safe, Scored

The short version

01
Best overall: Litever outlet strip. ETL certified, with a 10-foot cord that comes apart for a small hole.
4.9/5Check price →
02
Best compact outlet kit: briidea. A small box with 2 outlets and 2 USB ports.
4.8/5Check price →
03
Best UL-listed kit: OELFFOW. Names its UL file number and marks the neutral wire.
4.5/5Check price →
04
Best for tight spots: Kungfuking. The lowest-priced pick, with an angled wall plug.
4.7/5Check price →
05
Best for Liberty safes: Liberty 11015 kit. Three outlets, USB and Ethernet, made by Liberty.
4.5/5Check price →

Pick 1 of 5

Best overall

Outlets: 2 AC + 2 USB

Cord: 10 ft, comes apart

SafesGeek score
4.9/5
Check price on Amazon →
Works
4.9
ETL certified; owners say it works in their safes
Fit
4.9
Any safe or cabinet; 10 ft cord, the longest here
Install
4.7
Owners call it easy; the cord comes apart for a small hole
Value
4.9
Low-priced; owners say it’s worth it

Here’s the deal: the outlet kit to get for almost any gun safe. It’s a flat strip with two standard outlets and two USB ports, rated for 1,500 watts in total, on a 10-foot cord, the longest here. The plug end comes off at a connector, so you feed the cord through a small hole in the safe and snap it back together; one owner got it through a half-inch hole in the base. It’s ETL certified, and screws, adhesive and Velcro all come in the box. Owners say it works, that they had it wired up in minutes and that it runs their lights, dehumidifier rods and even a heater; one has five of them.

The catch: if your safe has no cord hole, you have to drill one, and several owners did. The USB ports put out 1 amp, so they charge slowly. Two outlets cover a rod and a light kit, not much more. Want a bigger safe with outlets already inside? See our best large gun safes.

Why we like it

✓ ETL certified
✓ 10 ft cord
✓ Three ways to mount it

Watch out for

✗ May need a hole drilled
✗ Two outlets only
✗ 1-amp USB ports

Outlets

2 AC (1,500 W total) + 2 USB

Cord

10 ft flat, plug comes off

Mount

Screws, adhesive or Velcro

Rating

ETL certified

Extras

Works in cabinets and closets too

Skip it if you own a Liberty safe and want the maker’s kit: see pick 5.

Find the cord hole before you order.

Look at the back and the floor of your safe for a factory cord hole, often closed with a plug, and measure it. Picks 1 to 4 come apart at a connector so the cord fits through a small hole; pick 5 needs a 3-inch hole through Liberty’s fireboard. Don’t drill a new hole in a fire-rated safe if it already has one: a hole gives heat a way in. When you snap the cord back together, make sure every wire is seated: across these kits, the connector draws the most complaints, and one owner checks each kit with a plug-in circuit tester before using it.

Pick 2 of 5

Best compact outlet kit

Outlets: 2 AC + 2 USB

Size: 5 × 1.6 in

SafesGeek score
4.8/5
Check price on Amazon →
Works
4.7
Owners mostly say it works and is well built
Fit
4.6
Any safe; 4.76 ft cord, the shortest here
Install
4.6
The cord splits for a small hole; owners split on the wiring
Value
4.9
Low-priced; owners call it good value

Here’s the deal: a small outlet box, about 5 by 1.6 inches, that takes little room on a safe wall. It has two 110-volt outlets and two USB ports, a housing of fire-retardant (94V-0) plastic, and a detachable cord with a coupler, so the wire slides through the small hole made for power in many safes, as one owner puts it. You can stick it on with the 3M tape or screw it in, and briidea gives a 2-year warranty. Owners mostly say it works, that it’s well built and easy to install, and they run heating rods, LED lights and scope chargers from it.

The catch: the cord is the shortest here at 4.76 feet, so the safe has to sit near a wall outlet. Owners are split on the wiring: one says the wires are hard to tell apart once you separate them, another that it took more than one try to get each wire to connect, and one says the screws strip. The listing names no safety listing, only the fire-retardant plastic. The Sekelo kit has almost the same listing text and may be the same box.

Why we like it

✓ Small box
✓ Tape or screws
✓ 2-year warranty

Watch out for

✗ Shortest cord
✗ Fiddly wiring
✗ No safety listing named

Outlets

2 × 110 V + 2 USB

Cord

4.76 ft, detachable

Mount

3M tape or 4 screws

Rating

None named (94V-0 housing)

Extras

2-year warranty

Skip it if you want a UL-listed kit: see pick 3.

Pick 3 of 5

Best UL-listed kit

Rating: UL listed (E467629)

Cord: 6.9 ft, quick-connect

SafesGeek score
4.5/5
Check price on Amazon →
Works
4.6
UL listed; few owner reviews, but they say it works
Fit
4.7
Any safe or cabinet; 6.9 ft cord
Install
4.6
Tape, no drilling into the wall; one owner replaced the connector
Value
4.9
Low-priced; owners call the price reasonable

Here’s the deal: the kit with the clearest safety listing. It names its UL file number (E467629), says every unit is polarity-tested, and marks the neutral side of the cord with ribs, which helps when you snap the cord back together inside the safe. You get two 125-volt, 15-amp outlets and two USB ports, a 6.9-foot cord with a reversible quick connector, and both 3M VHB tape and two screws, so you can mount it without drilling into the safe wall. Owners say it was easy to install and works; one is on their fourth.

The catch: it has far fewer owner reviews than the other picks, so there’s less to go on. One owner says the wire connector was no good and used wire nuts and electrical tape instead, and another says to check the wires are right before using it. The tape needs 24 hours to set before you rely on it.

Why we like it

✓ UL file number listed
✓ Neutral side marked
✓ No-drill mount

Watch out for

✗ Few owner reviews
✗ Connector doubts
✗ Tape needs 24 hours

Outlets

2 AC (125 V, 15 A) + 2 USB

Cord

6.9 ft, reversible quick connector

Mount

3M VHB tape or 2 screws

Rating

UL listed (E467629)

Extras

Polarity-tested, neutral side marked

Skip it if you’d rather go by lots of owner reviews: see pick 1.

Pick 4 of 5

Best for tight spots

Plug: Angled, 5.9 ft cord

USB: 2 × 1.5 A

SafesGeek score
4.7/5
Check price on Amazon →
Works
4.7
UL listed, the seller says; owners say it works
Fit
4.7
Any safe; angled wall plug for tight spots
Install
4.3
Owners split: the cord comes apart too easily
Value
4.9
Lowest-priced pick

Here’s the deal: a low-priced kit with a plug made for tight spots. The wall plug is angled to fit behind furniture, handy when the safe sits close to the wall, and the 5.9-foot cord has a pre-wired connector: you pull the cord off, run it through the safe and plug it back in. Inside you get two 120-volt, 12-amp outlets and two USB ports at 1.5 amps. The seller says it’s UL listed and FCC compliant, with a fire-retardant housing. Owners say it works, that it powers their lights and dehumidifiers, and one calls it a lot safer than splicing wires.

The catch: the connector. Owners are split on the install: one says the detachable cable made it a 5-minute job, but others say the cord unplugs too easily, the wires wouldn’t stay in the connector, and the screws were too big for the mounting holes. Test it before you stick it in the safe. The listing gives no UL file number, and MARSTEK sells a kit with the same listing text. One owner wishes the cord were longer.

Why we like it

✓ Lowest-priced pick
✓ Angled wall plug
✓ 1.5-amp USB ports

Watch out for

✗ Cord unplugs easily
✗ Screws don’t fit, one says
✗ No UL file number

Outlets

2 AC (120 V, 12 A) + 2 USB (1.5 A)

Cord

5.9 ft, angled plug, pre-wired connector

Mount

Wall mount with screws

Rating

UL listed, the seller says

Extras

FCC compliant, fire-retardant housing

Skip it if you want the easiest install: see pick 1.

Pick 5 of 5

Best for Liberty safes

Fits: Liberty safes made after 2007

Outlets: 3 + USB + Ethernet

SafesGeek score
4.5/5
Check price on Amazon →
Works
4.6
Owners mostly say it works; split on the outlets
Fit
4.1
Liberty safes made after 2007 only
Install
4.4
Owners call it easy, but it needs a 3-inch hole
Value
4.4
Mid-priced, about three times the others

Here’s the deal: Liberty’s own kit, made in the USA for every Liberty safe built after 2007. It gives you three 110-volt outlets plus, by the title, a USB port and an Ethernet connection, so a dehumidifier rod, lights and a network cable can all go in. It’s by far the most-reviewed kit here, and owners mostly say it’s easy to install, well made and works: one Liberty owner calls it the easiest way to get power to a dehumidifier, and another says it took about 10 minutes.

The catch: it’s made for Liberty safes only, and it needs a 3-inch hole through the fireboard and the carpet; owners whose safe had no hole cut one with a hole saw. Owners are split on the outlets: one says a plug won’t go into one of the three, one that the plugs sit too close together, and one that theirs had no USB port. Some got a unit that looked used. It costs about three times as much as the other picks. Not sure which safe to build around? See our best gun safes.

Why we like it

✓ Made for Liberty safes
✓ 3 outlets, USB and Ethernet
✓ Most-reviewed kit here

Watch out for

✗ Liberty safes only
✗ Needs a 3-inch hole
✗ Some arrive looking used

Outlets

3 × 110 V + USB + Ethernet

Cord

Not listed

Mount

Through a 3-inch hole in the fireboard

Rating

None named

Extras

Made in the USA by Liberty Safe

Skip it if your safe isn’t a Liberty: see pick 1.

PickOutletsCordMountRatingExtrasSizePlug
Litever outlet strip
Best overall
4.9/5
Check price
2 AC + 2 USB10 ft, comes apartScrews, adhesive or VelcroETL certifiedWorks in cabinets and closets too––
briidea
Best compact outlet kit
4.8/5
Check price
2 AC + 2 USB4.76 ft, detachable3M tape or 4 screwsNone named (94V-0 housing)2-year warranty5 × 1.6 in–
OELFFOW
Best UL-listed kit
4.5/5
Check price
2 AC (125 V, 15 A) + 2 USB6.9 ft, quick-connect3M VHB tape or 2 screwsUL listed (E467629)Polarity-tested, neutral side marked––
Kungfuking
Best for tight spots
4.7/5
Check price
2 AC (120 V, 12 A) + 2 USB (1.5 A)5.9 ft, angled plug, pre-wired connectorWall mount with screwsUL listed, the seller saysFCC compliant, fire-retardant housing–Angled, 5.9 ft cord
Liberty 11015 kit
Best for Liberty safes
4.5/5
Check price
3 + USB + EthernetNot listedThrough a 3-inch hole in the fireboardNone namedMade in the USA by Liberty Safe––

Not sure which one fits you? Find yours in 30 seconds

An outlet kit has one job: bring wall power inside your safe so a dehumidifier, lights and chargers can run there. Five questions decide which one.

Many gun safes have a small factory hole in the back or the floor for a cord, often closed with a plug. Picks 1 to 4 come apart at a connector so the cord fits through it; one owner got pick 1 through a half-inch hole. Pick 5 needs a 3-inch hole in a Liberty safe. Use the factory hole if there is one: a new hole in a fire-rated safe gives heat a way in. How easily the cord gets in, and how well the connector holds, is our Install score.

The cords here run from 4.76 feet (pick 2) to 10 feet (pick 1). Measure from the cord hole to the wall outlet before you order. A safe in a closet often sits far from one; see our best closet gun safes. The cord length and which safes a kit fits make up our Fit score.

Look for a listing the seller names: pick 1 is ETL certified, pick 3 gives its UL file number, and pick 4 says it’s UL listed without one. Pick 2 names only its fire-retardant plastic. ETL and UL both test electrical products for safety. The listing and what owners say about whether it works make up our Works score.

A dehumidifier rod and a plug-in light kit take two outlets, which picks 1 to 4 have, plus two USB ports for chargers. Pick 5 has three outlets. Check the spacing: plugs that sit too close together are a common complaint about outlet kits, and we left one kit out for it.

No. An outlet kit adds no fire time and doesn’t make the safe harder to break into. For that, see our best fireproof gun safes.

One last tip: power inside the safe is only the start. A dehumidifier rod, see our best gun safe dehumidifiers, and racks and door panels, see our best gun safe organizers, make the most of it.

Still not sure? Get the Litever outlet strip.
ETL certified, with a 10-foot cord that comes apart for a small hole, and owners say it works in their safes.
Check price on Amazon →
Do I need an outlet kit in my gun safe?

Only if you want something powered inside it: a dehumidifier rod, a plug-in light kit or a charger. If you only need to keep it dry, a cordless silica gel dehumidifier needs no power at all; see our best gun safe dehumidifiers.

Will drilling a hole hurt my safe’s fire rating?

A new hole gives heat a way in, so use the factory cord hole if your safe has one; most large gun safes do. Picks 1 to 4 come apart to fit through a small hole.

How much can I plug into a safe outlet kit?

Pick 1 is rated for 1,500 watts in total, and picks 3 and 4 list 15 and 12 amps. A dehumidifier rod and LED lights are small loads. Pick 1’s owners run rods, light kits and even a heater from it.

Will the Liberty kit fit my Cannon or Winchester safe?

It’s made for Liberty safes built after 2007, so for another brand plan on one of picks 1 to 4. They fit any safe with a cord hole; one owner uses pick 4 in a Winchester safe.

Does an outlet kit work in a gun cabinet?

Yes. Picks 1 to 4 are sold for safes and cabinets alike, and one owner of pick 1 put a second one in a tool cabinet. See our best gun cabinets.

Can I add an outlet to a safe that’s already in place?

Yes, but it’s harder: you need to reach the back or the floor of the safe to run the cord. One owner of pick 5 says it was a pain once the safe was in place, but worth it.

What else does a new gun safe need?

Something to keep it dry, something to keep it in order and a lock you trust. See our best gun safe organizers and best gun safe keypads.

Find your fit

A gun safe outlet kit brings power inside your safe for a dehumidifier, lights and chargers. If you want something a little different, these pages have it.

If you want
Power inside your safe
→ Gun safe outlet kits (you're here)
Kits that run outlets and USB ports through the safe's wall.
If you want
Dry air with no power
→ Gun safe dehumidifiers
Silica gel units that pull the damp out with no power at all.
If you want
Outlets already built in
→ Gun safes
Some gun safes come with outlets and USB ports already inside.

How to choose a gun safe outlet kit →

We looked at 336 products that came up on Amazon across 3 searches for “gun safe accessories”, “gun safe outlet kit” and “gun safe alarm sensor”. Most were lights, racks, dehumidifiers, alarms and whole safes; 21 were outlet kits. Then we counted what owners talk about most in their reviews of those 21: whether the kit works, the installation, the quality, the fit in the safe and the value. Those became our four scores: works, fit, install and value.

How we score: the overall score follows what owners think of each product: it sits within a tenth of a point of its average buyer rating, and our four checks decide where in that range. The four scores out of 5 compare the picks with each other on the things buyers of this product care about most, so a lower one shows where a pick gives a little ground to the others, not a bad product. Every pick here already made it through our screen of 336 listings. If owners mostly dispute a stated feature, it earns no points. We only picked kits we could score on all four, and we skipped listings you can’t buy right now and near-copies of the same kit.

Outlet kits get far fewer owner reviews than safes, and pick 3 has only a few dozen, so one owner’s comment can stand out. Where a point comes from one owner, we say so.

We didn’t test these products ourselves. Sizes and features are as the sellers list them. Where a listing contradicts itself, we say so.

SafesGeek Review Team

We read the listings, the specs and the owner feedback so you don’t have to.