Guide · Updated for 2026
Are Fingerprint Safes Safe? Can They Be Fooled, and Are They Fast Enough?
Fake fingers make the headlines. Recalled locks and missed reads are what really go wrong. Here’s how to check yours.
By the SafesGeek Review Team. We earn a commission if you buy through our links, at no cost to you.
The short answer
Are fingerprint safes safe? Mostly yes, if you check two things. Fooling a reader with a fake finger takes skill and months of work, and a burglar with a pry bar is faster. The real failures are duller. Since 2023, the CPSC has recalled more than 320,000 biometric safes whose readers opened for anyone’s finger, and every reader misses dry, wet or cut fingers now and then. Check yours against the recall list, test it with a finger you never enrolled, keep a code or key you can use in the dark, and practice.
This guide is about your own safe: how to judge it, check it and set it up. It doesn’t cover ways to get into anyone else’s.
How does a fingerprint safe work?
A fingerprint safe is an electronic safe with a small sensor instead of (or next to) a keypad. Here’s what happens:
- You enroll a finger. You press the same finger on the reader 3 or 4 times, lifting it and turning it a little each time, so the lock stores a fuller map of the print. On many safes the first one or two prints are “admin” prints that approve every other user.
- You touch the reader. The lock compares your print with the ones it stored. It opens on a close-enough match, not a perfect one, which is why the angle of your finger and the state of your skin matter so much.
- A motor or solenoid pulls the bolt back. That part runs on batteries, like the reader.
Most safes store 20 to 100 prints, so each adult in the house can enroll two fingers or more. On many models the prints stay stored when the batteries come out. Check your manual, and choose a safe that also opens with a code or a key: every safe on our fingerprint safes for valuables and biometric gun safes pages does.
Can a fingerprint safe be fooled with a fake finger?
In a lab, yes. In a home, it’s rare. The best-known test came from Cisco Talos, a security research team, in 2020. They made fake prints that fooled phone, laptop and padlock readers about 80% of the time. But it took them months, more than 50 molds and a fake sized almost exactly right, and they said a copy couldn’t be made on demand and quickly. Their verdict: fingerprints are fine for ordinary people; people targeted by well-funded attackers shouldn’t rely on them.
For a home safe, three things matter more than fake fingers:
- Force is faster. A thief who wants what’s inside brings a pry bar, not a mold. The reader decides who opens the door; the steel, the bolts and how the safe is fixed down decide how hard it is to break into. If that’s your worry, a heavier gun safe does more than any lock.
- A print can’t be changed. You can change a code if someone sees it. You can’t change your fingerprint, so a reader is only as private as your finger.
- Your finger goes where you go. Someone can press it to the reader while you sleep, or force you to. A code in your head can’t be taken that way. For most homes that’s a small risk, but it’s real.
The real way fingerprint safes get fooled: recalls
The biggest failures on record weren’t fake fingers. They were safes that opened for any finger at all, often without the owner knowing. In several cases the owner thought the safe was set up, but it had never left its “open to anyone” factory mode. Here’s what the U.S. Consumer Product Safety Commission (CPSC) has recalled or warned about since 2023:
| When | Brand | Safes | What was reported |
|---|---|---|---|
| Oct 2023 | Fortress (also sold as Cabela’s, Gettysburg, Legend Range & Field) | About 61,000 | 39 reports of unpaired fingers opening them; a lawsuit alleges a 12-year-old died with a gun taken from one |
| Feb 2024 | Awesafe (sold before Dec 7, 2022) | About 60,000 | 71 reports |
| Feb 2024 | Bulldog Cases | About 33,500 | 4 reports |
| Feb 2024 | Machir | About 24,820 | 15 reports |
| Feb 2024 | BBRKIN / MouTec, model QCJJ01 | About 2,200 | A 6-year-old opened one |
| Jun 2024 | Sports Afield Home Defense 4-Gun and Sanctuary Quick Access | About 133,000 | 77 reports |
| Aug 2024 | Owsoo and Cacagoo (CPSC warning: the sellers didn’t answer a recall request) | About 7,600 | 6 reports |
| Feb 2025 | Stack-On, 18 biometric models (a CPSC commissioner’s warning; no acceptable recall agreed) | About 183,000 | The same flaw |
| Jul 2026 | BBRKIN / MouTec rifle safe, model QHXP029B | About 9,100 | Repair kit |
That’s more than half a million safes, sold at Walmart, Bass Pro, Cabela’s, Lowe’s and on Amazon. So when people ask “are fingerprint safes safe?”, the honest answer is that the reader is rarely beaten, but it can be built or set up wrong.
The rules are catching up slowly. The ASTM standard for small youth-resistant gun boxes (F2456) says a biometric reader must not open anything until an owner has programmed a print. Gun safes, gun cabinets and long-gun boxes are outside that standard, so CPSC staff asked ASTM in 2024 to cover them too, and a working group was still preparing clearer biometric rules in February 2026.
What to do
- Check your brand and model at cpsc.gov/Recalls. The model and serial number are on a label, often on the front, back or bottom.
- If it’s recalled, follow the CPSC’s steps: stop using the reader, take the batteries out, use only the key, and contact the maker for the free repair or replacement.
- Test any fingerprint safe, recalled or not. After you set it up, ask an adult whose finger isn’t enrolled to try it. It must stay shut. If it opens, stop using the reader and call the maker.
The test takes a minute, and it’s worth doing on every fingerprint safe, including the ones on our bedside gun safes page.
Why won’t it read my finger?
This is the complaint owners make most. Across the 67 fingerprint safes behind our fingerprint safe picks, more than half of the comments about reliability are negative, and about a third of the comments on the reader itself. On biometric gun safes, the reader is the topic owners split on most. Owners describe readers that work 8 times in 10, readers that need many tries, and fingers that stopped reading for months after a burn.
The usual causes
- Dry, cracked or worn skin, and thick calluses.
- Wet or sweaty fingers, and cold hands.
- Cuts, burns and bandages.
- Dirt, grease or lotion on the finger or the sensor.
- Gloves. Most readers won’t read through them.
- A finger placed off-center, or just the tip.
- Weak batteries, which can slow or stop the reader.
What helps
- Enroll with the center of the print flat on the sensor, then lift and turn it slightly for each scan.
- Enroll the same finger twice, and a finger from your other hand, so a cut or a busy hand doesn’t lock you out.
- Keep the sensor clean and dry.
- Warm cold hands first. Owners with very dry fingers say a little natural skin oil helps.
- Re-enroll if reads start to drop, for example when the season changes.
If it never reads, use the code or the key, and re-enroll with the manual’s steps. Locked out completely? See our guide: Locked out of your safe?
Are fingerprint safes fast enough in an emergency?
Fast enough when they read the first time. Listings claim the reader works in 0.1 to 0.3 seconds. In real use it’s slower: one gun instructor puts it at about 0.75 seconds to over a second in the dark, and owners describe 1 to 2 seconds on a good safe. The number that really matters is the first-try rate. Each miss costs you a second or two and your calm.
Owners and instructors agree on the setup:
- Keep one small safe by the bed for one handgun. A big gun safe in the closet is too slow at night.
- Mount it where your hand falls, with the reader facing you, so you don’t have to look for it.
- Choose one with a light inside and a backup you can use by feel: a short code or a key on your keyring.
- Test it the hard way: wet hands, cold hands, in the dark, half-asleep. Ten tries tell you more than any listing.
- Practice. Instructors say to open it until it’s automatic, then keep doing it every month.
If your fingers read badly, there are other fast locks. Push-button boxes have no reader and no batteries, and owners say they open in under 3 seconds with practice. RFID safes open when you tap a wristband or a tag. Our quick-access gun safes and push-button safes cover both.
Fingerprint, keypad or key: which is safer?
It depends on what you’re keeping out. None of these locks makes a light box hard to break into. They differ in speed, in how they fail, and in how easily kids get past them.
| Lock | Speed | Batteries | Fails when | Kids |
|---|---|---|---|---|
| Fingerprint | Fastest when it reads | Yes | Dry, wet, cut or cold fingers; dead batteries; programming faults | Can’t learn a print, but check the recall list and test it |
| Keypad | Fast with a short code | Yes | Dead batteries; codes forgotten under stress | They watch and learn codes |
| Push-button (mechanical) | Fast with practice | No | Rarely; code forgotten | They watch and learn codes |
| Key | Slow in the dark | No | The key is lost or out of reach | They find keys |
| RFID tag | A tap | Yes (some run on wall power) | You’re not wearing the tag | Anyone with the tag opens it |
Three things owners stress:
- The box matters more than the lock. Most fingerprint boxes are light steel with no burglary rating. Bolt or cable it down, keep it out of sight, and see our handgun safes for heavier boxes.
- The backup is part of the lock. On cheap boxes the backup key often opens a simple tubular lock, so the key, not the reader, sets the security. Keep the key where kids can’t find it, and never inside the safe.
- Dead batteries rarely strand you if there’s a key or an outside power port. If you’d rather have no reader at all, our keypad safes open with a code you choose.
So, are fingerprint safes safe? A setup checklist
- Check the brand and model at cpsc.gov/Recalls.
- Enroll two fingers, each two or three times, centered and flat.
- Ask an adult who isn’t enrolled to try it. It must stay shut.
- Test your own finger wet, cold and in the dark, ten times.
- Learn the backup code by feel; keep the key outside the safe and away from kids.
- Bolt or cable the safe down.
- Change the batteries every year, or at the first low-battery warning.
- Practice every month.
Quick to open, with a backup
Fingerprint, code and 2 keys, with a lit keypad. The fingerprint safe owners find easiest to use.
Fingerprint, PIN, key and a USB-C port for dead batteries, with a steel cable for one handgun.
No finger needed. Tap an RFID wristband or tag and the lid pops open; wall power, AA batteries and a key as backups.
Check price on Amazon →See all our quick-access gun safe picks
Related guides
Quick answers
Do fingerprint safes work with gloves?
Usually not. Take a glove off, or use the code or key.
Does a dead battery erase my fingerprints?
Usually not: many safes keep prints in memory without power. Check your manual, then use the key or an outside power port.
Can I reset a fingerprint safe without my fingerprint?
Yes, with the backup code or key and the reset steps in the manual. No code and no key? See our lockout guide.
How many fingerprints can a safe store?
Most store 20 to 100. Enroll at least two fingers for each adult who needs to get in.
Sources: U.S. Consumer Product Safety Commission: Fortress Safe recall (October 2023); Awesafe, Bulldog Cases, Machir and BBRKIN / MouTec recalls (February 2024); Sports Afield and Sanctuary recall (June 2024); Owsoo and Cacagoo warning (August 2024); Commissioner statement on Stack-On (February 2025); BBRKIN / MouTec QHXP029B recall (July 2026); CPSC staff letter to ASTM on biometric requirements (April 2024) and the ASTM task group summary (February 2026). ASTM F2456, Standard Safety Specification for Youth-Resistant Firearms Containers. Cisco Talos, “Fingerprint cloning: Myth or reality?” (April 2020). Vaultek fingerprint enrollment guides. Amazon listings of our picks. Owner reports: topic level only. Checked November 2026.
