8 Best Foams for Gun Cases, Scored on Fit, Protection, Build and Value

The short version

01
Best overall: Case Club 54″ Polyethylene Foam. One closed-cell sheet you cut to fit a rifle case.
4.7/5Check price →
02
Best for small cases: Treela 16 × 12″ Polyethylene Foam. Two closed-cell sheets for pistol-size cases, at a low price.
4.7/5Check price →
03
Best fit: Case Club Apache 4800 Pistol Foam. Precut for six pistols and 21 magazines.
4.7/5Check price →
04
Best layered foam: ONREVA 16 × 12″ Kaizen Foam. Peel-off layers set the depth of every cutout.
4.7/5Check price →
05
Best value: DECOHS Pick-and-Pluck Foam 4-Pack. The lowest price per sheet, plucked to shape by hand.
4.3/5Check price →
06
Best for an ammo can: Case Club .50 Cal Ammo Can Pistol Foam. Precut for 2 pistols and 4 magazines in a .50 cal can.
4.7/5Check price →
07
Best Pelican 1750 insert: Cobra Pelican 1750 Replacement Foam. One solid blank that drops into the case, ready to cut.
4.6/5Check price →
08
Best no-cut organizer: Magpul DAKA Grid for Pelican 1750. Press-in blocks you move around, no knife needed.
4.4/5Check price →

Pick 1 of 8

Best overall

Size: 54 × 16 × 2 in

Foam: Closed-cell polyethylene

SafesGeek score
4.7/5
Check price on Amazon →
Fit
4.6
Cuts to fit Pelican 1700, 1720 and 1750 rifle cases; needs a sharp knife
Protection
4.9
Closed-cell polyethylene, 2 in thick; won’t soak up water or gun oil
Build
4.9
Owners praise the quality and sturdiness, with very few complaints
Value
4.4
Mid-priced for one sheet; owners split on value

Here’s the deal: one long sheet of firm foam, big enough for a rifle case. Case Club calls it military-grade, closed-cell polyethylene, 54 × 16 × 2 inches, and says it won’t absorb water, gun oil or other moisture, won’t tear easily and won’t crumble the way old pluck foam does. You trace your rifle and cut it with a razor blade, an electric carving knife or a sharp knife; trimmed to size, Case Club says it fits all major rifle cases, including the Pelican 1700, 1720 and 1750. Owners praise the quality, the dense, strong material and how cleanly it cuts with a craft knife or a Dremel, and one owner says it’s just like Pelican’s own foam.

The catch: it’s one sheet at a mid price, and owners are split on whether it’s worth it. You need a sharp blade and some patience: nothing plucks out by hand. The title says “PE, PU & Convoluted Foam”, but the listing describes a single polyethylene sheet.

Why we like it

✓ Closed-cell: no water or oil soaks in
✓ Long enough for a rifle case
✓ Owners call it sturdy and dense

Watch out for

✗ Needs a knife to shape
✗ One sheet at a mid price
✗ Title names three foams, listing one

Size

54 × 16 × 2 in

Fits

Rifle cases (Pelican 1700, 1720, 1750 after cutting)

Pack

1 sheet

Material

Closed-cell polyethylene

Shaping

Cut with a sharp or electric knife

Skip it if you want to shape foam by hand without a knife: see pick 5.

Foam isn’t a lock.

Foam holds a gun still, not safe: anyone who opens the latches can lift it out. If children or visitors could reach the case, put a padlock through its lock points or a lock on the gun, see our best gun locks, and keep the case in a locked safe at home, see our best gun safes. Check your state’s storage rules too.

Pick 2 of 8

Best for small cases

Size: 16 × 12 × 2 in

Pack: 2 closed-cell sheets

SafesGeek score
4.7/5
Check price on Amazon →
Fit
4.4
16 × 12 × 2 in; cut by knife, no grid; owners say it cuts easily
Protection
4.7
Closed-cell polyethylene, 2 in thick; owners praise the protection
Build
4.7
Tear-resistant, Treela says; owners call it sturdy
Value
4.7
Low price for two sheets

Here’s the deal: closed-cell polyethylene, cut to a size that fits many pistol and accessory cases. You get two 16 × 12 × 2 inch black sheets, and Treela lists gun storage among their uses. Treela says the foam is closed-cell, elastic and tear-resistant. Owners praise the quality, say the sheets are sturdy, thick and dense, cut easily and protect what’s inside, with almost no complaints.

The catch: there’s no pre-cut grid, so you trace your pistol and cut it out with a knife. At 16 × 12 inches it’s too short for a long gun; for a rifle case see pick 1.

Why we like it

✓ Closed-cell polyethylene
✓ Two 2-inch sheets
✓ Almost no owner complaints

Watch out for

✗ Needs a knife to shape
✗ Too short for long guns
✗ No pre-cut grid

Size

16 × 12 × 2 in

Fits

Pistol and accessory cases

Pack

2 sheets

Material

Closed-cell polyethylene

Shaping

Cut with a knife

Skip it if your case is a rifle case: see pick 1.

Pick 3 of 8

Best fit

Holds: 6 pistols, 21 magazines

Fits: Apache 4800 case only

SafesGeek score
4.7/5
Check price on Amazon →
Fit
4.9
Precut for 6 pistols and 21 magazines; drops into an Apache 4800
Protection
4.7
Closed-cell polyethylene base; convoluted lid foam holds the guns down
Build
4.7
Owners praise the quality and durability
Value
4.3
Premium price for foam only; owners split on value

Here’s the deal: no cutting at all. This is a finished foam set for the Apache 4800, the hard case Harbor Freight sells, precut to hold six semi-auto pistols and 21 pistol magazines. Take out the sixth pistol slot and it becomes five pistols plus an accessory pocket. The base foam is closed-cell polyethylene that wipes clean, and a convoluted (egg-crate) lid foam presses the guns down when the case closes. Owners praise the quality, the durable build and the precut magazine slots, which take single- and double-stack magazines, one owner says.

The catch: it fits one case only, and the case isn’t included. Case Club sets a maximum pistol length of 8 5/8 inches and says the set isn’t made for revolvers, though some may fit. You pay a premium price for foam alone, and owners are split on the value. Case Club sells precut sets for other cases too, such as the Pelican 1500.

Why we like it

✓ Precut: no knife needed
✓ Six pistols and 21 magazines
✓ Closed-cell base, egg-crate lid

Watch out for

✗ Fits the Apache 4800 only
✗ Pistols up to 8 5/8 in
✗ Premium price for foam

Size

Fits the Apache 4800 case

Fits

6 semi-auto pistols, 21 magazines

Pack

Base and lid foam

Material

Closed-cell polyethylene, convoluted lid

Shaping

Precut, no cutting

Skip it if you don’t own an Apache 4800: see pick 2.

Pick 4 of 8

Best layered foam

Size: 16 × 12 × 2 in

Layers: Black over red

SafesGeek score
4.7/5
Check price on Amazon →
Fit
4.7
Peel-off layers set the depth of each cutout; owners praise the fit and easy cutting
Protection
4.6
High-density polyethylene, 2 in thick
Build
4.4
Owners split on the layers; durability complaints edge out praise
Value
4.7
Low-to-mid price for three sheets; owners rate value highly

Here’s the deal: the neatest way to cut a custom insert. Each 16 × 12 × 2 inch sheet is high-density polyethylene in thin layers, black over a red base. You trace your gun, cut around the line and peel layers out until the cutout is just deep enough, so a pistol and its magazines can sit at different depths. The red base shows through every cutout, which is the “tool shadow” look the listing describes. ONREVA sells it for toolboxes and drawers, and also names hard cases, camera cases and gun cases. Owners praise the quality, the fit and the value, and say it cuts easily.

The catch: it’s sold mainly as toolbox foam, and the listing doesn’t say whether the foam is closed-cell. Owners are split on the layers: most peel cleanly, but some are hard to separate, and durability complaints slightly outnumber the praise.

Why we like it

✓ Layers set each cutout’s depth
✓ Red base shows every cutout
✓ Three sheets per pack

Watch out for

✗ Some layers hard to peel
✗ Durability reviews lean negative
✗ Sold mainly as toolbox foam

Size

16 × 12 × 2 in

Fits

Pistol, tool and accessory cases

Pack

3 sheets

Material

Layered high-density polyethylene

Shaping

Cut, then peel layers to depth

Skip it if you want foam that never needs a knife: see pick 3.

Pick 5 of 8

Best value

Size: 16 × 12 × 2 in

Grid: About 0.4 in cubes

SafesGeek score
4.3/5
Check price on Amazon →
Fit
4.6
Pre-cut grid: pluck out the shape by hand; owners split on size
Protection
4.3
Open-cell polyurethane; owners mostly find it thinner than 2 in
Build
4.1
Durability complaints beat praise; some owners say it falls apart
Value
4.9
Lowest price per sheet; four sheets in a pack

Here’s the deal: the classic pick-and-pluck foam, at the lowest price per sheet here. Each of the four 16 × 12 × 2 inch sheets is scored into a grid of cubes about 0.4 inch across, so you pull out the shape of your pistol by hand and trim the edges with a knife if you like. It’s soft, elastic polyurethane. Owners praise the quality and say it fits and works well in gun cases.

The catch: owners mostly say it’s thinner than 2 inches, with far more complaints than praise about thickness, and they’re split on whether the size is right. It ships vacuum-packed, and DECOHS says to let it rest for about a day to recover. Durability complaints beat the praise, with some owners saying it falls apart. It’s open-cell foam, and the listing calls it not water resistant, so don’t leave a damp gun in it.

Why we like it

✓ Plucks to shape by hand
✓ Lowest price per sheet
✓ Four sheets per pack

Watch out for

✗ Often thinner than listed
✗ Can tear or crumble
✗ Open-cell: holds moisture

Size

16 × 12 × 2 in, as listed

Fits

Pistol, tool and accessory cases

Pack

4 sheets

Material

Open-cell polyurethane

Shaping

Pick and pluck by hand

Skip it if you want foam that lasts for years: see pick 2.

Pick 6 of 8

Best for an ammo can

Holds: 2 pistols, 4 magazines

Fits: .50 cal ammo can

SafesGeek score
4.7/5
Check price on Amazon →
Fit
4.7
Precut for 2 semi-auto pistols and 4 magazines; drops into a .50 cal ammo can
Protection
4.7
Closed-cell polyethylene in 3 pieces; soft lid foam holds the guns down
Build
4.6
Owners praise the quality; split on the foam, some find it hard
Value
4.6
Low price for a precut set; owners mostly call it worth it

Here’s the deal: it turns a .50 cal ammo can into a two-pistol case. The set is 3 pieces of closed-cell polyethylene: a flat pad for the bottom, a denser base with cutouts for 2 semi-auto pistols and 4 magazines, and a softer lid foam that presses them down when the can closes. The foam wipes clean, and it lifts out easily. Owners praise the quality, say 2 full-size pistols and 4 magazines fit, and use it as a travel kit for the range.

The catch: the ammo can isn’t included, and the set fits a .50 cal can only. Case Club sets a maximum pistol length of 8 5/8 inches and says it isn’t made for revolvers. Owners are split on the foam itself: some like it, others find it hard rather than soft, and some say the magazine cutouts are too big. An ammo can seals out water but doesn’t lock unless you add a padlock.

Why we like it

✓ Precut: no knife needed
✓ 2 pistols and 4 magazines
✓ Closed-cell foam wipes clean

Watch out for

✗ Ammo can not included
✗ Pistols up to 8 5/8 in
✗ Some find the foam hard

Size

11 × 5.62 in foam

Fits

2 semi-auto pistols, 4 magazines

Pack

3 pieces: bottom pad, base, lid

Material

Closed-cell polyethylene

Shaping

Precut, no cutting

Skip it if you carry more than 2 pistols: see pick 3.

Pick 7 of 8

Best Pelican 1750 insert

Size: 50.5 × 13.5 × 1.75 in

Fits: Pelican 1750

SafesGeek score
4.6/5
Check price on Amazon →
Fit
4.7
Sized to drop into a Pelican 1750 rifle case; you cut the gun shapes
Protection
4.4
High-density solid foam, 1.75 in; the foam type isn’t listed
Build
4.6
Owners praise the quality and the fit
Value
4.4
Mid-priced for one insert

Here’s the deal: new foam for gun case owners with a Pelican 1750, one of the most common long-gun cases: a fresh blank cut to its shape. It’s one solid piece, 50.5 × 13.5 × 1.75 inches, so it drops straight in with no trimming of the outline; you only cut the shapes of your rifle and gear with a utility knife or a foam cutter. It’s made to replace worn or plucked-out pick-and-pluck foam. Owners say it fits the case perfectly, and one says it’s better than the original.

The catch: the listing says “high-density” but not whether it’s closed-cell polyethylene or open-cell polyurethane, which decides whether it soaks up moisture and gun oil. It’s one layer for one case, so check which other pieces your case needs, and it fits the Pelican 1750 only. Owner feedback is thin so far. You still need a sharp knife and a steady hand.

Why we like it

✓ Drops right into a Pelican 1750
✓ One solid piece, no seams
✓ Owners praise the fit

Watch out for

✗ Foam type not listed
✗ Fits one case only
✗ You cut the shapes yourself

Size

50.5 × 13.5 × 1.75 in

Fits

Pelican 1750 rifle case

Pack

1 insert

Material

High-density foam (type not listed)

Shaping

Cut with a knife or foam cutter

Skip it if your case isn’t a Pelican 1750: see pick 1.

Pick 8 of 8

Best no-cut organizer

Build: EPP base and blocks

Fits: Pelican 1750, Apache 9800

SafesGeek score
4.4/5
Check price on Amazon →
Fit
4.7
Press-in blocks you move to fit each gun; fits Pelican 1750, Apache 9800, Eylar 53 in
Protection
4.7
Expanded polypropylene: resists chemicals, wipes clean
Build
4.6
Owners praise the durability and quality
Value
4.0
Premium price; more owners complain about the value than praise it

Here’s the deal: an insert you never cut. Magpul’s DAKA Grid is a base of expanded polypropylene (EPP) foam panels with a grid of holes, and DAKA blocks press into it wherever you want them, to brace a rifle, magazines, optics and gear. Change guns and you pull the blocks and set them up again, with no tools and no new foam. It’s made for the Pelican 1750, the Harbor Freight Apache 9800 and the 53-inch Eylar case. EPP resists chemicals and wipes clean. Owners like the fit, the options and the durability, and one calls it better than pick-and-pluck foam.

The catch: the price. It costs several times more than a foam sheet, and more owners complain about the value than praise it. It fits those three cases only, and the case isn’t included. Unlike cut foam for gun case use, the blocks hold a gun in place rather than wrapping it in a cutout, so test it with your heaviest rifle before a rough trip.

Why we like it

✓ No cutting: move the blocks
✓ EPP resists chemicals, wipes clean
✓ Resets for a new rifle

Watch out for

✗ Premium price
✗ Owners fault the value
✗ Fits 3 cases only

Size

Fits Pelican 1750, Apache 9800, Eylar 53 in

Fits

Rifles, magazines, optics, gear

Pack

Grid base panels and DAKA blocks

Material

Expanded polypropylene (EPP)

Shaping

No cutting: press-in blocks

Skip it if you want the lowest price: see pick 5.

PickSizeFoamFitsPackMaterialShapingHolds
Case Club 54″ Polyethylene Foam
Best overall
4.7/5
Check price
54 × 16 × 2 inClosed-cell polyethyleneRifle cases (Pelican 1700, 1720, 1750 after cutting)1 sheetClosed-cell polyethyleneCut with a sharp or electric knife–
Treela 16 × 12″ Polyethylene Foam
Best for small cases
4.7/5
Check price
16 × 12 × 2 in–Pistol and accessory cases2 closed-cell sheetsClosed-cell polyethyleneCut with a knife–
Case Club Apache 4800 Pistol Foam
Best fit
4.7/5
Check price
Fits the Apache 4800 case–Apache 4800 case onlyBase and lid foamClosed-cell polyethylene, convoluted lidPrecut, no cutting6 pistols, 21 magazines
ONREVA 16 × 12″ Kaizen Foam
Best layered foam
4.7/5
Check price
16 × 12 × 2 in–Pistol, tool and accessory cases3 sheetsLayered high-density polyethyleneCut, then peel layers to depth–
DECOHS Pick-and-Pluck Foam 4-Pack
Best value
4.3/5
Check price
16 × 12 × 2 in–Pistol, tool and accessory cases4 sheetsOpen-cell polyurethanePick and pluck by hand–
Case Club .50 Cal Ammo Can Pistol Foam
Best for an ammo can
4.7/5
Check price
11 × 5.62 in foam–.50 cal ammo can3 pieces: bottom pad, base, lidClosed-cell polyethylenePrecut, no cutting2 pistols, 4 magazines
Cobra Pelican 1750 Replacement Foam
Best Pelican 1750 insert
4.6/5
Check price
50.5 × 13.5 × 1.75 in–Pelican 17501 insertHigh-density foam (type not listed)Cut with a knife or foam cutter–
Magpul DAKA Grid for Pelican 1750
Best no-cut organizer
4.4/5
Check price
Fits Pelican 1750, Apache 9800, Eylar 53 in–Pelican 1750, Apache 9800Grid base panels and DAKA blocksExpanded polypropylene (EPP)No cutting: press-in blocks–

Not sure which one fits you? Find yours in 30 seconds

Foam has two jobs in a gun case: hold the gun still and cushion it from knocks. Four questions decide which foam does that best for you.

This is the protection question. Closed-cell polyethylene (picks 1 to 3) is firm, doesn’t soak up water or gun oil and lasts for years. Open-cell polyurethane, the soft kind most pick-and-pluck foam is made of (pick 5), is cheap and easy to shape, but it takes up moisture and can tear or crumble with use. For a gun that lives in its case, closed-cell is the safer choice. Either way, foam doesn’t dry a case: put the gun away clean and dry, and for long storage add a desiccant or see our best gun safe dehumidifiers.

Pick-and-pluck foam needs no tools, but the edges come out stepped (pick 5). Solid polyethylene gives a clean, tight fit if you trace the gun and cut with a sharp or electric knife (picks 1 and 2). Layered foam lets you peel each cutout to the right depth (pick 4). A precut set needs no work at all, but fits one case model only (pick 3).

Measure the inside of your case, not the outside. Sheets of 16 × 12 inches suit many pistol cases; a rifle case needs a long sheet like pick 1. Many cases use a thin flat layer on the bottom, a thick cutout layer for the gun and a convoluted (egg-crate) layer in the lid. Watch the thickness: most foam ships vacuum-packed, and across the foam listings we checked, more than half of what owners say about thickness is a complaint. Let new foam rest a day and measure it before you cut.

Solid sheets fit any case once you trim them. Precut sets and replacement inserts are made for one case model, so check the model number first.

One last tip: trace your gun with a marker before you cut or pluck, and keep the cutout snug so the gun can’t shift. Shopping for the whole case instead? See our best hard rifle cases, our best pistol cases and our best shotgun cases.

Still not sure? Get the Case Club 54″ foam sheet.
Closed-cell foam that won’t soak up water or gun oil, long enough to cut to fit a rifle case.
Check price on Amazon →
What is the best foam for a gun case?

Closed-cell polyethylene, for most guns: it’s firm, doesn’t soak up water or gun oil and lasts. Picks 1 to 3 are closed-cell. Pick-and-pluck polyurethane is cheaper and easier to shape, but it wears out sooner.

Can foam in a gun case cause rust?

It can. Open-cell foam holds moisture against the steel, especially in a sealed case. Closed-cell foam doesn’t absorb water, but no foam dries the air. Store guns clean and dry; for a safe or cabinet, see our best gun safe dehumidifiers.

Why is my new foam thinner than the listing says?

Most foam ships vacuum-packed and needs time to expand; DECOHS says about a day. Even so, owners of many pluck foams say the sheets stay thinner than listed, so measure before you cut.

How do you cut gun case foam?

Trace the gun with a marker. Cut polyethylene with a razor blade, an electric carving knife or a sharp knife, as Case Club suggests. Pluck foam tears out by hand along its grid. Layered foam is cut first, then peeled to depth.

Can I keep a gun stored in a foam case?

Yes, if the gun goes in clean and dry and the foam is closed-cell. Check it now and then. Inside a gun safe, a gun sock does the same scratch-proof job with less bulk; see our best gun socks.

Is foam good for storing magazines and ammo?

Precut foam like pick 3 holds magazines next to the guns. For boxes of ammo, a sealed can works better; see our best ammo storage.

Find your fit

Gun case foam keeps every gun snug and cushioned in the case you already own. If you want something a little different, these pages have it.

If you want
Every gun snug in its case
→ Gun case foam (you're here)
Pick-and-pluck and custom foam that fits the case you have.
If you want
A case for long guns
→ Hard rifle cases
A rifle locked and padded on the way to the range, the field or the plane.
If you want
A case for handguns
→ Pistol cases
Hard cases for one pistol or five, with foam already inside.
If you want
Dry storage
→ Gun safe dehumidifiers
Electric rods and rechargeable desiccant that dry a safe or cabinet.

How to choose foam for a gun case →

We looked at 171 products that came up on Amazon across 9 searches for “foam for gun case”. We set the cases, bags and lock boxes aside, kept the foam itself, and counted what owners talk about most in their reviews: fit and size, thickness and density, durability and value. Those became our four scores.

How we score: the overall score follows what owners think of each product: it sits within a tenth of a point of its average buyer rating, and our four checks decide where in that range. The four scores out of 5 compare the picks with each other on the things buyers of this product care about most, so a lower one shows where a pick gives a little ground to the others, not a bad product. Every pick here already made it through our screen of 171 listings. If owners mostly dispute a stated feature, it earns no points. We only picked foam we could score on all four, kept one listing per foam line, and left out foam pistol racks, seat upholstery foam, expanding packing foam and inserts sold only for camera cases.

We didn’t test these products ourselves. Sizes and features are as the sellers list them. Where a listing contradicts itself, we say so.

SafesGeek Review Team

We read the listings, the specs and the owner feedback so you don’t have to.